Turntables

Reloop RP-8000 Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm
$699.00

Reloop RP-8000 STR Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

Reloop RP-8000 Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm
Reloop RP-8000 STR Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
Reloop RP-8000 STR Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
Reloop RP-8000 STR Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

Reloop RP-8000 STR Straight Advanced Hybrid Torque Turntable w/ Straight Tone Arm (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

by Reloop
$699.00

NEXT GENERATION TURNTABLE CONTROLLER

The Reloop RP-8000 combines modern DJ technology in an advanced turntable. This hybrid high torque turntable does the balancing act between approved direct drive technology and a digital control section for your DJ software. The RP-8000 is able to communicate with any midi compatible DJ software - an additional modular controller is not necessary anymore. Serato Scratch Live mappings are also available with which the worldwide most popular and stable DVS system can be controlled. With the Trax encoder it is possible to scroll through your playlists and comfortably load tracks onto the decks.

READY FOR SERATO DJ

The RP8000 is taken into the exclusive "Official Serato Accessory" family, becoming the first ever Serato-supported turntable on the market. Use the RP8000 as part of your DVS set up with seamless plug and play integration allowing for previously unimagined creative possibilities. The MIDI control strip is now fully pre-mapped within Serato DJ 1.6.2, offering all the trigger action you could need thanks to the 4 combinable performance modes - Cue, Loop, Sample and Slicer.

ULTRA POWERFUL, QUARTZ DRIVEN DIRECT DRIVE

Besides the indestructible and sturdy construction, the turntable does not only cope with the hardest club surroundings, its technical features are as powerful: an ultra powerful, quartz driven direct drive with precise even speed and digital correction emphasizes the Reloop RP-8000's class. The high-resolution pitch (+/- 8%, +/- 16% and +/- 50 %) with a resolution of 0.02% is shown on the LCD and facilitates exact beat matching with long mixes.

WEAPON FOR TURNTABLISTS

Sophisticated and fast turntablism showcases can also be realized without a problem, thanks to the additional start/stop button for vertical positioning and a variable torque from "Classic" to "HiTorque". More variety in the mix: with the reverse button and an adjustable start/stop time from 0.2 to 6 seconds, individual and creative impulses can be set with the RP-8000.

Features

  • Advanced Hybrid Torque Turntable
  • Digital DJ turntable with upper-torque direct drive
  • Straight skip proof tone arm, optimized for turntablists
  • MIDI compatible control section consisting of Trax encoder, 8 backlit drum pads and 4 combinable performance modes (cue, loop, sample and slicer)
  • Large Trax encoder
  • Auto deck-assign feature
  • Turntable link USB port
  • Digital LC-Display for pitch display, BPM value, deck assignment and firmware settings
  • New features with firmware update 0.13 and Serato DJ 1.7
  • BPM can be shown on the pitch display
  • Adjustable global sampler volume
  • Looped slicer mode
  • Loop shift
  • Adjustable brake (0.2 - 6 seconds) & torque (1600 - 4500 g/cm)
  • Metal top panel with metallic finish
  • Phono and line output (no grounding necessary)
  • Direct connection of turntable and motor for best possible stability
  • Especially heavy finish
  • Pitch range +/-8%, +/-16%, +/-50%
  • High resolution pitch fader (0,02% Resolution)
  • LCD pitch display
  • Easy to exchange, freely revolvable needle illumination with super bright LED
  • Quartz lock
  • Safety power switch
  • Reverse switch
  • 2 start/stop buttons for vertical positioning
  • Smart USB link for up to 4 turntables
  • Rubber inlay for reduction of vibrations and ambient noise
  • Removable mains and RCA cables
  • Sunk-in connection cavity for easy case installation
  • Shock proof feet
  • Vibration-resistant base
  • Serato Scratch Live mappings available
  • Native Instruments Traktor & Virtual DJ mappings available
  • Plug‘n Play with Serato DJ (min 1.6.2)

Technical Data

  • Type: manual quartz direct drive turntable with MIDI control
  • Drive: quartz driven upper-torque direct drive
  • Motor: brushless DC motor
  • 3 speeds, fully manual
  • Turntable RPM: 33 1/3, 45 and 78 RPM
  • Turntable: aluminum die casting
  • Pitch: variably adjustable +/-8%, +/-16%, +/-50%
  • Torque: adjustable from min. 1600 - 4500 g/cm
  • Start-up time/tempo change: less than 0.2 sec.
  • Brake system: electronic brake
  • Wow and flutter: 0.01% WRMS*
  • S/N ratio: more than -55 dB (1 kHz, 4mV input)
  • Admissible cartridge weight range: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
  • 2x start/stopp buttons
  • Adjustable stop time (0.2 - 6 sec.)
  • Power input: 14 W
  • Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
  • Dimensions: 458 x 144.6 x 354 mm
  • Weight: 9.7 kg
  • Incl. USB cable, slipmat, tone arm illumination, but without stylus and headshell

 

Shipping

  • Ground shipping is free (orders over $40)
  • Free shipping only to the lower 48 states
  • Store Pick Up In Santa Fe Springs, Ca also available
  • This item ships from the factory to us in Santa Fe Springs, CA upon your order. Please allow a few extra days for us to ship to you. We believe a quality piece of gear like this is work the wait 😊 Thank You.
    Reloop RP-8000 Advanced Hybrid Torque Turntable
    $699.00

    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

    Reloop RP-8000 Advanced Hybrid Torque Turntable
    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)
    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

    Reloop RP-8000 Advanced Hybrid Torque Turntable (Email for D.O'B. Price - TOO LOW TO ADVERTISE!!!)

    by Reloop
    $699.00

    NEXT GENERATION TURNTABLE CONTROLLER

    The Reloop RP-8000 combines modern DJ technology in an advanced turntable. This hybrid high torque turntable does the balancing act between approved direct drive technology and a digital control section for your DJ software. The RP-8000 is able to communicate with any midi compatible DJ software - an additional modular controller is not necessary anymore. Serato Scratch Live mappings are also available with which the worldwide most popular and stable DVS system can be controlled. With the Trax encoder it is possible to scroll through your playlists and comfortably load tracks onto the decks.

    READY FOR SERATO DJ

    The RP8000 is taken into the exclusive "Official Serato Accessory" family, becoming the first ever Serato-supported turntable on the market. Use the RP8000 as part of your DVS set up with seamless plug and play integration allowing for previously unimagined creative possibilities. The MIDI control strip is now fully pre-mapped within Serato DJ 1.6.2, offering all the trigger action you could need thanks to the 4 combinable performance modes - Cue, Loop, Sample and Slicer.

    ULTRA POWERFUL, QUARTZ DRIVEN DIRECT DRIVE

    Besides the indestructible and sturdy construction, the turntable does not only cope with the hardest club surroundings, its technical features are as powerful: an ultra powerful, quartz driven direct drive with precise even speed and digital correction emphasizes the Reloop RP-8000's class. The high-resolution pitch (+/- 8%, +/- 16% and +/- 50 %) with a resolution of 0.02% is shown on the LCD and facilitates exact beat matching with long mixes.

    WEAPON FOR TURNTABLISTS

    Sophisticated and fast turntablism showcases can also be realized without a problem, thanks to the additional start/stop button for vertical positioning and a variable torque from "Classic" to "HiTorque". More variety in the mix: with the reverse button and an adjustable start/stop time from 0.2 to 6 seconds, individual and creative impulses can be set with the RP-8000.

    Features

    • Advanced Hybrid Torque Turntable
    • Digital DJ turntable with upper-torque direct drive
    • MIDI compatible control section consisting of Trax encoder, 8 backlit drum pads and 4 combinable performance modes (cue, loop, sample and slicer)
    • Large Trax encoder
    • Auto deck-assign feature
    • Turntable link USB port
    • Digital LC-Display for pitch display, BPM value, deck assignment and firmware settings
    • New features with firmware update 0.13 and Serato DJ 1.7
    • BPM can be shown on the pitch display
    • Adjustable global sampler volume
    • Looped slicer mode
    • Loop shift
    • Adjustable start/brake (0.2 - 6 seconds) & torque (1600 - 4500 g/cm)
    • Metal top panel with metallic finish
    • Phono and line output (no grounding necessary)
    • Direct connection of turntable and motor for best possible stability
    • Especially heavy finish
    • High end tonearm
    • Pitch range +/-8%, +/-16%, +/-50%
    • High resolution pitch fader (0,02% Resolution)
    • LCD pitch display
    • Easy to exchange, freely revolvable needle illumination with super bright LED
    • Quartz lock
    • Safety power switch
    • Reverse switch
    • 2 start/stop buttons for vertical positioning
    • Smart USB link for up to 4 turntables
    • Rubber inlay for reduction of vibrations and ambient noise
    • Removable mains and RCA cables
    • Sunk-in connection cavity for easy case installation
    • Shock proof feet
    • Vibration-resistant base
    • Serato Scratch Live mappings available
    • Native Instruments Traktor mappings available
    • Plug'n Play with Serato DJ (min 1.6.2)

    Technical Data

    • Type: manual quartz direct drive turntable with MIDI control
    • Drive: quartz driven upper-torque direct drive
    • Motor: brushless DC motor
    • 3 speeds, fully manual
    • Turntable RPM: 33 1/3, 45 and 78 RPM
    • Turntable: aluminum die casting
    • Pitch: variably adjustable +/-8%, +/-16%, +/-50%
    • Torque: adjustable from min. 1600 - 4500 g/cm
    • Start-up time/tempo change: less than 0.2 sec.
    • Brake system: electronic brake
    • Wow and flutter: 0.01% WRMS*
    • S/N ratio: more than -55 dB (1 kHz, 4mV input)
    • Admissible cartridge weight range: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
    • Anti-skating range: 0 - 3 g
    • 2x start/stopp buttons
    • Adjustable start/stop time (0.2 - 6 sec.)
    • Power input: 14 W
    • Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
    • Dimensions: 458 x 144.6 x 354 mm
    • Weight: 9.7 kg
    • Incl. USB cable, slipmat, tone arm illumination, but without stylus and headshell

     

    Shipping

    • Ground shipping is free (orders over $40)
    • Free shipping only to the lower 48 states
    • Store Pick Up In Santa Fe Springs, Ca also available
    • This item ships from the factory to us in Santa Fe Springs, CA upon your order. Please allow a few extra days for us to ship to you. We believe a quality piece of gear like this is work the wait 😊 Thank You.
      Reloop RP-7000 High-Torque Turntable (Silver)
      $499.00

      Reloop RP-7000 High-Torque Turntable (Silver)

      Reloop RP-7000 High-Torque Turntable (Silver)
      Reloop RP-7000 High-Torque Turntable (Silver)
      Reloop RP-7000 High-Torque Turntable (Silver)

      Reloop RP-7000 High-Torque Turntable (Silver)

      by Reloop
      $499.00

      Professional Upper Torque Turntable System

      With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

      Sturdy Casing Construction

      By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

      Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base

      The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

      Dual Start/Stop Buttons, Precise Motor Control and Reverse Function

      As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

      High-Resolution Pitch Section with Digital Fader

      Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

      High-Quality Connections and Integrated Phono Pre-Amp

      Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

      Powerful Motor with Extensive Adjustment Possibilities

      The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

      Features

      • NEW in the MK2 version
      • Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
      • More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
      • Fine-tuned motor control for further optimization of wow and flutter and rotation
      • Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
      • Particularly light weight and rigid, satin aluminium material used for tone arm
      • Adjustable Pitch scale for precise adjustments
      • Optional ground terminal offers additional protection in complex club & studio environments
      • Easily replaceable, freely rotatable LED needle light in new aluminium design
      • High-quality and hard-wearing deep black, metallic finish
      • Quartz driven DJ turntable with upper-torque direct drive
      • Adjustable stop speed (0.2 - 6 sec.)
      • Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
      • Precision manufactured, die cast aluminium turntable
      • Rubber inlays to reduce vibrations and background noise
      • Static-balance universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
      • Universal connection for pickup systems (SME)
      • Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
      • Quartz lock
      • Additional start/stop button for vertical positioning
      • Reverse function: switch for forwards and reverse operation
      • Recessed connection cavity for easy installation in cases & seamless adjustment
      • Phono and line out (no earth required)
      • Removable mains and Cinch cable
      • Safety mains switch
      • Shock-absorbing feet to insulate against vibrations

      Technical Data

      Turntable:
        • Type: direct-drive turntable
        • Drive: quartz driven upper-torque direct drive
        • Motor: 16-pole, 3-phase, brushless motor
        • Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
        • Starting torque: 2.8 – 4.5 kg/cm (adjustable)
        • Adjustable stop time (0.2 - 6 sec.)
        • Start-up time / change to RPM: <0.2 sec
        • Wow and flutter: 0.01% WRMS*
        • S/N ratio: > 55dB (DIN-B)
        • Brake system: electronic brake
      Platter:
        • Material: die cast aluminium
        • Diameter: 332 mm
        • Weight: approx. 1.5 kg
      Tone arm:
        • Type: universal, static balanced, S-shaped
        • Effective length: 230 mm
        • Overhang: 15 mm
        • Tracking error range: < 3°
        • VTA setting range: 0-6 mm
        • Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
        • Anti-skating range: 0 – 3 g
        • Effective tone arm mass: 30 g
        • Connections: 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
      General:
        • Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
        • Power consumption: 13 W
        • Dimensions: 458 (W) x 354 (D) x 144,6 (H) mm
        • Weight: approx. 11.7 kg
      Accessories included:
      • turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, AC mains adapter, operating instructions

       

      Shipping

      • Ground shipping is free (orders over $40)
      • Free shipping only to the lower 48 states
      • Store Pick Up In Santa Fe Springs, Ca also available
      • This item ships from the factory to us in Santa Fe Springs, CA upon your order. Please allow a few extra days for us to ship to you. We believe a quality piece of gear like this is work the wait 😊 Thank You.
        Reloop RP-7000 High-Torque Turntable
        $499.00

        Reloop RP-7000 High-Torque Turntable

        Reloop RP-7000 High-Torque Turntable
        Reloop RP-7000 High-Torque Turntable
        Reloop RP-7000 High-Torque Turntable
        Reloop RP-7000 High-Torque Turntable
        Reloop RP-7000 High-Torque Turntable

        Reloop RP-7000 High-Torque Turntable

        by Reloop
        $499.00

        Professional Upper Torque Turntable System

        With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

        Sturdy Casing Construction

        By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

        Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base

        The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

        Dual Start/Stop Buttons, Precise Motor Control and Reverse Function

        As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

        High-Resolution Pitch Section with Digital Fader

        Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

        High-Quality Connections and Integrated Phono Pre-Amp

        Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

        Powerful Motor with Extensive Adjustment Possibilities

        The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

        Features

        • NEW in the MK2 version
        • Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation
        • More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
        • Fine-tuned motor control for further optimization of wow and flutter and rotation
        • Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
        • Particularly light weight and rigid, satin aluminium material used for tone arm
        • Adjustable Pitch scale for precise adjustments
        • Optional ground terminal offers additional protection in complex club & studio environments
        • Easily replaceable, freely rotatable LED needle light in new aluminium design
        • High-quality and hard-wearing deep black, metallic finish
        • Quartz driven DJ turntable with upper-torque direct drive
        • Adjustable stop speed (0.2 - 6 sec.)
        • Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
        • Precision manufactured, die cast aluminium turntable
        • Rubber inlays to reduce vibrations and background noise
        • Static-balance universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
        • Universal connection for pickup systems (SME)
        • Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
        • Quartz lock
        • Additional start/stop button for vertical positioning
        • Reverse function: switch for forwards and reverse operation
        • Recessed connection cavity for easy installation in cases & seamless adjustment
        • Phono and line out (no earth required)
        • Removable mains and Cinch cable
        • Safety mains switch
        • Shock-absorbing feet to insulate against vibrations

        Technical Data

        Turntable:
          • Type: direct-drive turntable
          • Drive: quartz driven upper-torque direct drive
          • Motor: 16-pole, 3-phase, brushless motor
          • Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
          • Starting torque: 2.8 – 4.5 kg/cm (adjustable)
          • Adjustable stop time (0.2 - 6 sec.)
          • Start-up time / change to RPM: <0.2 sec
          • Wow and flutter: 0.01% WRMS*
          • S/N ratio: > 55dB (DIN-B)
          • Brake system: electronic brake
        Platter:
          • Material: die cast aluminium
          • Diameter: 332 mm
          • Weight: approx. 1.5 kg
        Tone arm:
          • Type: universal, static balanced, S-shaped
          • Effective length: 230 mm
          • Overhang: 15 mm
          • Tracking error range: < 3°
          • VTA setting range: 0-6 mm
          • Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
          • Anti-skating range: 0 – 3 g
          • Effective tone arm mass: 30 g
          • Connections: 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
        General:
          • Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
          • Power consumption: 13 W
          • Dimensions: 458 (W) x 354 (D) x 144,6 (H) mm
          • Weight: approx. 11.7 kg
        Accessories included:
        • turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, AC mains adapter, operating instructions

         

        Shipping

        • Ground shipping is free (orders over $40)
        • Free shipping only to the lower 48 states
        • Store Pick Up In Santa Fe Springs, Ca also available
        • This item ships from the factory to us in Santa Fe Springs, CA upon your order. Please allow a few extra days for us to ship to you. We believe a quality piece of gear like this is work the wait 😊 Thank You.