Crown Audio CDi Series CDi6000 2X2100W Power Amplifier


Crown Audio CDi Series CDi6000 2X2100W Power Amplifier

(Call For D.O'B. Sound Pro Price)

Crown Audio CDi-6000 Overview

The 2 RU rack-mountable Crown Audio CDi 6000 is a rugged, lightweight commercial power amplifier designed for dual-channel or bridge-mono operation in installed audio applications such as restaurants, retail stores, warehouses, offices, and more. The CDi 6000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It delivers 2100W per channel at 4 Ohms, and supports multiple low-impedance configurations, as well as 70V and 140V constant-voltage systems. The switch-mode universal power supply enables safe operation across the globe.

Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 6000 also has integrated DSP presets for adjustable crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information. The removable Euroblock inputs and barrier strip outputs accommodate a variety of system setups.

  • Rugged and lightweight steel construction, occupies 2 RU in any standard equipment rack
  • Operates in dual or bridge-mono modes
  • Wide range of speaker impedances and outputs, including 2/4/8 Ohms and 70V or 140V
  • Excellent sound reproduction with low distortion
  • Advanced protection circuitry protects against overheating, overloads, and shorts
  • Integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer
  • Switch-mode universal power supply
  • Backlit LCD shows relevant information

    Crown Audio CDi-6000

    Channels 2
    Output Power Dual Mode at 2 Ohms: 3000 W per channel
    Dual Mode at 4 Ohms: 2100 W per channel
    Dual Mode at 8 Ohms: 1200 W per channel
    Dual Mode at 70 Vrms: 2500 W per channel
    Bridge-Mono Mode at 4 Ohms: 6000 W
    Bridge-Mono Mode at 140 Vrms: N/A
    Sensitivity 1.4 V (for full rated power at 8 Ohms)
    Signal-to-Noise Ratio (SNR) 103 dBA (below rated 1 kHz power at 8 Ohms)
    THD < 0.5%
    Damping Factor > 500 (20 to 400 Hz)
    Frequency Response 20 Hz to 20 kHz at 1 W (+0 dB, -1 dB)
    Crosstalk > 70 dB (below rated power, 20 Hz to 1 kHz)
    Input Impedance Balanced: 20 kOhms (nominal)
    Unbalanced: 10 kOhms
    Load Impedance Dual Mode: 2 to 8 Ohms
    Bridge-Mono Mode: 4 to 16 Ohms
    Voltage Gain 37.1 dB (at 1 kHz, 8-Ohm rated output)
    Maximum Input Level +22 dBu typical
    Inputs 2 x 3-pin Euroblock (removable Phoenix-type)
    Outputs 4-position barrier strip with connectors for dual loudspeakers or bridge-mono loudspeaker
    USB 1 x USB Type-B
    Operating Temperature 32 to 104°F / 0 to 40°C at 95% relative humidity (non-condensing)
    Line Current 15.3 A
    Current Consumption ≤ 180 W at idle
    Power 100 V, 120 V, 220 to 240 V, 50/60 Hz, IEC 15 A connector
    Dimensions (W x H x D) 19.0 x 3.5 x 16.2" / 48.3 x 8.9 x 41.1 cm
    Weight 24 lb / 10.9 kg




          D.O'B. Sound Pro is an Authorized Dealership of this brand and all brands that we carry. If we do not have current stock, we can special order directly from the manufacturer any item still in production.
          Just send us a message and we will get you an ETA and pricing.



            • Most items are shipped out within 2 business days upon cleared payment
            • Ground shipping is free (orders over $40)
            • Free shipping only to the lower 48 states
            • DISCOUNT FOR STORE PICK UP In Santa Fe Springs, Ca