dB Technologies INGENIA IG3T 2-Way Active Speakers (2 x 10" / 1.4", 900W RMS)

by dB Technologies
$1,649.00

dB Technologies INGENIA IG3T 2-Way Active Speakers (2 x 10" / 1.4", 900W RMS)

  • WORK AS STAND-ALONE SYSTEM OR IN COUPLE
  • CEC HORN TECHNOLOGY (ASYMMETRICAL VERTICAL COVERAGE)
  • DIGITAL STEERING COVERAGE
  • ELEMENT POSITION DETECTION (IR PORT)
  • SPEAKERS WITH NEODYMIUM MAGNETS
  • OLED DSP INTERFACE
  • UNIQUE SPEAKER LOCK SYSTEM

INGENIA series embodies a longtime experience in acoustics, mechanics, power electronics and DSP programming, combined with talent and intuition in order to create an unprecedented active speaker: compact, modular, flyable, user-friendly and incredibly smart.

The INGENIA IG3 T is equipped with 2 premium 10" low frequency transducers and 1 1.4"compression driver

All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one.

Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. 

INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility.

Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs  levels and imput devices.

.INGENIA can be easily and safely coupled through a  LP-IG accessory  which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation.

Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array. 

 

System Specifications
Speaker Type 2-way active speaker
Acoustic Specifications
Frequency Response -10 dB: 53 to 20000 Hz
-6 dB: 57 to 19200 Hz
Maximum SPL 132 dB
High Frequency Drivers Size: 1.4" (3.5 cm), 3" (3.6 cm) voice coil
Directivity (H x V): 110 x 90° (20 /-70°)
Type: Neodymium compression driver
Horn Vertical asymmetric
Crossover Frequency 1100 Hz
Low Frequency Drivers Size: 2 x 10.0" (25.4 cm), 2.5" (5.1 cm) voice coil
Type: Neodymium
Amplifier
Technology Digipro G3
Class Class D
RMS Power 900 W
Peak Power 1800 W
Processor
Controller DSP 56-bit
Converter AD / DA: 24-bit / 48 kHz
Limiter Dual active peak, RMS, thermal
Input
Signal Input 1 x Combo IN (XLR + Jack 6.3 mm)
User Interface OLED display and rotative knob with switch
Signal Output 1 x XLR link out
Service Port Mini USB
Connector Mains: New Neutrik NAC3PX
Features
Positioning Self-rotating display
Accelerometer
Infrared communication and display mirroring
10 / 5 / 0 / -5 / -10° digital steering
Equalizer Acoustic correction (Low / high shelving, mid attenuation)
Microphone HPF and notch filter (variable frequency)
Delay On Board:

Stage Alignment: 49.2' (15.0 m)
System Delay: 143.4' (43.7 m)
Mechanics
Housing Polypropylene PP reinforced
Grille Full / invisible screws; flyable
Handles 1 x Top
1 x Bottom
Pole Mount Standard D36 mm
Dimensions (W × H × D) 11.02 x 31.73 x 15.47" (27.99 x 80.59 x 39.29 cm)
Weight 49.0 lb (22.2 kg)

 

Shipping
  • Most items are shipped out within 2 business day after cleared payment
  • Ground shipping is free (orders over $40)
  • Free shipping only to the lower 48 states