JBL SRX835P 15" Three-Way Bass Reflex Self Powered System

JBL SRX835P 15" Three-Way Bass Reflex Self Powered System

Name: JBL SRX835P 15" Three-Way Bass Reflex Self Powered System
Brand: JBL
Price: 1599.0 USD
Availability: InStock

$1,599.00

Quantity

JBL SRX835P 15" Three-Way Bass Reflex Self Powered System
(Message For D.O'B. Sound Pro Price)

The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 15" three-way, SRX835P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBL’s long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBL’s flagship touring systems.

Transducer Design: features premium JBL transducers. High frequencies are handled by an annular polymer diaphragm compression driver that features a best in class 3" voice coil coupled to a 1.5" throat opening. Using a neodymium magnet, the compression driver is lightweight, efficient, and extremely powerful. This delivers very high power levels with reduced distortion and increased phase coherence resulting in smooth, crystal clear high frequencies.
Uses a 15-inch woofer with JBL's patented Differential Drive Technology for reduced weight while maximizing power amp efficiency. 3" voice coils and dual ferrite drivers deliver exceptionally low distortion and extended low frequency response

Features a midrange driver that is derived from the midrange transducer on the VTX 20 touring line array system. The outside cast aluminum frame acts as the structural support, acoustic cavity, and heat sink for the driver, optimizing both space in the speaker cabinet and the performance of the system at the same time

DSP Control: Using a 400 MHz DSP Sharc Chip, the speaker offers 20 PEQs, 2 seconds of delay, signal generators, input mixing, amplifier monitoring, and 50 user presets with 96 kHz FIR filters and LevelMax Limiting

Compatibility: Incorporates V5 JBL Tunings for compatibility with flagship Vertec and VTX touring systems

LCD Screen: Supports fast setup and configuration

Drivecore Amplification by Crown: Offers 103 dB signal-to-noise ratio with 2000W Peak available Class-D power

HiQnet Network Control: Allow for configuring the system via wired Ethercon connector or wireless connection when linked to a third party router for use with Audio Architect, HiQnet Motion Control, and standalone applications for iOS and Android mobile devices

SPECS:

PA Speaker
Configuration	Active 3-Way
Total Power Capacity	2000 W Peak 1500 W RMS
Amplifier Class	Class-D

Performance
Frequency Response	41 Hz to 20 kHz -3 dB
Maximum SPL	137 dB
Coverage Angle	60° H x 40° V
Gain Range	Line Input: 21 dB Aux Input: 3 dB Mic Input: 45 dB Line Input: 20 dBu Aux Input: 8 dBu Mic Input: -4 dBu
I/O Impedance	Input: 40 kOhms (Balanced) 20 kOhms (Unbalanced)

Connectivity
Audio I/O	2 x Combo XLR-1/4" TRS Input 2 x XLR 3-Pin Male Output 1 x XLR 3-Pin Mix Output

Signal Processing
Crossover	Low-Pass: 330 Hz High-Pass: 2.4 kHz

Power
AC Input Power	100 to 240 VAC, 50 / 60 Hz
Current Consumption	120 VAC: 2.2 A (1/8 Power) 5.6 A (1/3 Power)

Physical
Mounting	1 x 1.4" / 36 mm Pole Socket 12 x M10
Handles	2
Cooling	Fan (Variable Speed)
Construction Material	Perforated Metal Grille, Plywood
Dimensions	38.7 x 21.4 x 18.7" / 98.4 x 54.4 x 47.6 cm
Weight	85 lb / 38.6 kg