Shure CVL Centraverse Lavalier Cardioid Condenser Microphone
Shure CVL Centraverse Lavalier Cardioid Condenser Microphone
Highlights
- Optimized for Speaking
- Cardioid Polar Pattern
- Miniature Design
- Includes Tie Clip & Windscreen
The CVL Centraverse Lavalier Condenser Microphone from Shure is a miniature lavalier condenser microphone that is optimized for speech and vocal performance. A tie clip and windscreen are included.
- Designed for low visibility
- Permanently charged electret condenser element for vocal reproduction
- TA4F (TQG) connector integrates with Shure wireless bodypack systems
- Tailored frequency response optimized for public speaking and presentation
Tips to Improve Wireless System Performance
If you encounter interference or dropouts, try the following suggestions:
- Choose a different receiver channel
- Reposition the receiver so there is nothing obstructing a line of sight to the transmitter (including the audience)
- Avoid placing transmitter and receiver where metal or other dense materials may be present
- Move the receiver to the top of the equipment rack
- Remove nearby sources of wireless interference, such as cell phones, two-way radios, computers, media players, Wi-Fi devices, and digital signal processors
- Charge or replace the transmitter battery
- Keep transmitters more than two meters (6 feet) apart
- Keep the transmitter and receiver more than 5 meters (16 feet) apart
- During sound check, mark trouble spots and ask presenters or performers to avoid those areas
Shure CVL Specs
Type | Electret condenser |
Frequency Response | 50 Hz to 20 kHz |
Polar Pattern | Cardioid |
Output Impedance | 600 Ω @ 1 kHz, typical |
Audio Output Level | -43.5 dBV/Pa |
Signal to Noise Ratio | 72 dB @ 1 kHz |
Maximum SPL | 139 dB, @ 1 kHz (1,000 Ω load) |
Dynamic Range | 117 dB, @ 1 kHz (1,000 Ω load) |
Output Noise | 22 dB, typical, A-weighted |
Power Requirements | +5 V DC (nominal), 10 V maximum (DC bias) |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
Cable | 50" (1.3 m) |
Connector | TA4F |
Weight | 0.88 oz (25 g) |
Packaging Info | |
---|---|
Package Weight | 0.3 lb |
Box Dimensions (LxWxH) | 7.7 x 5.0 x 3.1" |
LavShipping
- Ground shipping is free (orders over $40)
- Free shipping only to the lower 48 states
- DISCOUNT FOR STORE PICK UP In Santa Fe Springs, Ca