Studiologic Sledge 2.0 is now a 61 note 24 Voice Virtual Analog Synth with tactile control. (Email for D.O’B. Sound Pro Price)

$899.00

Studiologic Sledge 2.0 is now a 61 note 24 Voice Virtual Analog Synth with tactile control.

(Email for D.O’B. Sound Pro Price)

Waldorf synth engine inside 3 oscillators per voice, up to 1000 presets can be
stored. Extremely high quality detailed sound. Sample and Wave loading.

If the look doesn't stop you in your tracks, the sound will. The Studiologic Sledge 2.0 is a welcomed update to the original version, blending an intoxicating mix of pure synthesized tones with organic sound sampling. With double the polyphony, Sledge 2.0 give you up to 24 voices that can be played simultaneously for even greater control and completely new sound combinations.

https://youtu.be/XUN48WAehrI

 

In addition to its incredible sound engine and user-friendly control panel, Sledge 2.0 further expands the instrument' power and versatility. Studiologic and Waldorf Labs teamed up to make Sledge 2.0 more flexible as a pure synthesizer, adding the ability to play in Dual Mode two programs at the same time, load samples and mix post processing effects for an endless array of sonic creativity. Auto Dual mode: Sledge 2.0 can now play two sounds at the same time, in Split or Layer mode; the feature is controlled by a new page of the Global function and allows to simply keep one note (for Split) or more notes (for Layer) and then select a new sound, that will be added to the previous sound; as any other sound, also Dual Sound combinations can be permanently stored in any of the 1.000 available presets;

Sample Player: sound samples and new waves can be loaded in the internal 60 megabyte of Flash memory, played by OSC 1 and modifiable by all parameters of the control panel, adding other oscillators, setting filters, envelopes and effects. This feature can constantly expands the instrument' sounds and create a totally new combination of synthesis and sampling.

Pitch & Hold controls: a new Global page allows to enable the Pitch and the Hold separately for the Lower and Upper sounds in Dual Mode, allowing to use the Pitch bend on the Upper sound (i.e. for solo parts) and the Hold pedal to control only the Lower (to keep playing a Drums groove or as a Damper for a Piano sound) and vice versa, or to enable Pitch Bend and Hold on both Upper and Lower sounds; Reverb+Delay: a new function allows to mix both effects; the Reverb keeps the setting previously selected, while the real time controls (time and level) allows to set the parameters of Delay also when mixed.

Enhanced Polyphony: the total maximum number or notes that can be played at the same time have been expanded to 24, allowing to get a better real time control over the new sound possibilities obtainable from synthesis and sampling together. Sledge Spectre: samples can be edited (keyboard range, tuning and other parameters) and transmitted to Sledge 2.0 by the USB port, with this easy sample editor that allows to first load and play the samples on your Computer and then download them into the instrument' memory.

FEATURES

  • 61 key polyphonic synthesizer with Aftertouch
  • Enhanced polyphony, up to 24 voices
  • Split or Layer mode, play two sounds at the same time
  • Load up to 60MB of sound samples in the internal Flash memory
  • Up to 999 programmable Sounds
  • Fast and efficient sound selection via numeric keypad
  • Enable Pitch and the Hold separately for the Lower and Upper sounds
  • Enhanced Reverb and Delay effects with blend control
  • USB compatibility, design sounds on the computer and load into Sledge 2.0

Design more sounds than ever before. Order the Sledge 2.0 today!

SPECIFICATIONS

·  Keyboard 61 keys + Aftertouch

·  35 Pots - 3 œchicken head rotary switches (7 positions) - 1 rotary encoder + push function

·  2 x 16 digits backlit LCD

·  High Quality Pitch and Mod Wheels

·  Up to 999 programmable Sounds

·  Fast and efficient sound selection via numeric keypadMODULATION

  • 2 fast LFOs per voice with adjustable Speed and Depth
  • 1 extra modulation routing for Mod Wheel, with adjustable Speed and Depth
  • - LFO Shape: Sawtooth, Rectangular, Triangle, Sine, Sample & Hold, Ramp
  • - Destination: Osc 1, Osc2, Ocs3, PWM / Wave / FM, Volume, Filter Cutoff

SOUND GENERATION

  • 24 Voices polyphony - Monophonic mode with single or multiple trigger
  • 3 Oscillators per voice OSC1/OSC2/OSC3
  • - Range from 64' to 1' with Semitone ant Detune controls
  • - Shapes: Sawtooth, Square, Triangle, Sine, Pulse (with Pulse Width Modulation)
  • - OSC 1 with 66 Original PPG Wavetables + Sample Player (60MB internal memory)
  • FM - Frequency Modulation of Sine and Triangle - Oscillator Hard sync (OSC 2 to OSC 3)
  • Noise Generator - White and Pink noise
  • Mixer with Volume and On/Off switch for each Oscillator and Noise
  • AUTO DUAL MODE : Split or Layer mode “ prog. split point for each Program

FILTER & AMPLIFIER

  • 1 Multi Mode Filter per voice - 24 / 12dB - Lowpass - Highpass - Bandpass
  • - Resonance up to Self-Oscillation and beyond - Adjustable Key track and Drive
  • 2 fast Envelopes per voice (Filter-Amplifier) with Amount and Velocity control (Filter+Ampli)

ARPEGGIATOR

  • Powerful Arpeggiator - Latch mode - syncable to MIDI Clock
  • - Direction Up, Down, Alternate - Range up to 10 Octaves

EFFECTS

  • 2 simultaneous Effects
  • - Effect 1: Chorus / Phaser / Flanger
  • - Effect 2: Reverb / Delay / Reverb+Delay

CONTROLS & CONNECTIONS

  • Master Volume Control
  • Power Switch
  • Stereo line output
  • Headphone output
  • Expression pedal input

MIDI IN / OUT

  • USB connector for MIDI IN/ OUT, Firmware Update, Samples Loading (with Spectre)
  • - uses standard USB MIDI driver provided by host computer OS
  • - Windows ME minimum, Windows XP or newer recommended
  • - Mac OS X 10.2 minimum, Mac OS X 10.3 or newer recommended
  • Built in power supply

SIZE/WEIGHT

  • 97 cm x 40,5 cm x 11 cm
  • 38,19" x 15,94" x 4,33"
  • 8,3 Kg | 18,3 lbs

ADDITIONAL PACKAGE CONTENTS

  • Power Cord
  • CD Manual

 

Keyboard 61-key 5 octave Fatar TP 9 keyboard
Controls 32 pots
3 chicken head rotary switches (7 positions)
1 rotary encoder with push function
Master volume
Power
Display 2 x 16 digits backlit LCD
Wheels Pitch and Mod
Modulation Routing For Mod Wheel with adjustable Speed and Depth
LFO Shape: Sawtooth, Rectangular, Triangle, Sine, Sample & Hold, Ramp
Destination: Osc 1, Osc2, Ocs3, PWM / Wave / FM, Volume, Filter Cutoff
Sounds Up to 999 programmable sounds
Polyphony 24 voices
Modes Monophonic with single or multiple trigger
Oscillators Range: from 64' to 1' with semitone and detune
Shapes: Sawtooth, Square, Triangle, Sine, Pulse (with Pulse Width Modulation)
Oscillator 1 with 66 original PPG Wavetables and sample player (60 MB internal memory)
Multimode Filter 1 per voice:
24 / 12dB
Lowpass
Highpass
Bandpass
Resonance up to self-oscillation
Adjustable Keytrack and Drive
Arpeggiator Latch mode
syncable to MIDI Clock
Direction Up, Down, Alternate
Range up to 10 Octaves
Effects 2 simultaneous effects:
Effect 1: Chorus / Phaser / Flanger
Effect 2: Reverb / Delay / Reverb+Delay
Other Frequency Modulation of sine and triangle
Oscillator Hardsync (Osc 2 to Osc 3)
Noise Generator with selectable white and pink noise
Mixer with Volume and On/Off switch for each Oscillator and Noise
2 fast Envelopes per voice (filter / amplifier)
Auto Dual Mode: Split or Layer mode - programmable split point for each Program
MIDI In and out
Input Expression pedal
Output Line Out: 2 x 1/4" / 6.35 mm
Headphone: 1 x stereo 1/4" / 6.35 mm
USB USB connector for MIDI In/ Out, firmware update, samples loading (with Spectre)
Uses standard USB MIDI driver provided by host computer OS
Windows ME minimum, Windows XP or newer recommended
Mac OS X 10.2 minimum, Mac OS X 10.3 or newer recommended
Power Supply Built-in
Dimensions 38.2 x 15.9 x 4.3" / 97.0 x 40.5 x 11.0 cm
Weight 18.3 lb / 8.3 kg

 

Shipping

  • Ground shipping is free (orders over $40)
  • Free shipping only to the lower 48 states
  • Store Pick Up In Santa Fe Springs, Ca also available
  • This item ships from the factory to us in Santa Fe Springs, CA upon your order. Please allow a few extra days for us to ship to you. We believe a quality piece of gear like this is work the wait 😊 Thank You.